How To Prepare The Best Flooring For Athletic Surfaces

Each sports floor must be carefully prepared before laying. This process begins with the open playground surface and ends with the flooring inside of an indoor gym. The correct way to start is to reinforce the floor surface, which also helps with prolonging its life. Although the criteria for the construction of sports surfaces vary, in many ways the basic units are identical. Bases must be smooth, clean, have a high level of sturdiness and water resistance. These surfaces are mostly placed on concrete, asphalt, sand or any other crushed base that is made out of rock. The choice of selecting the base type under the floor cover is premised on the material surface and the potential characteristics of the room area. Although, this universal flooring basis works for all types of athletic surfaces, there is a strict guideline for approaching the process properly. 

How to Lay Asphalt Base For Sports Surfaces 

The asphalt base is recognized for its easy operation and flexibility to all weather conditions. It is normally chosen by an acrylic, rubberized crumb base or synthetic lawn coating. Often we use asphalt in outdoor playgrounds as a separate surface. If the asphalt coating has been installed correctly according to guidelines, then it will last more than 7 years. For this purpose, asphalt paving experts tampa fl work to accurately eliminate grasses, soil compaction and determine the slope for surface drainage in the beginning processes. To neutralize the germination of grass in the years ahead, a specialized method should be applied. The way that you go about this is to cover the ground with gravel. Use crushed stone or sand sealing above 95 percent to strengthen the coating’s resistance to external influences. Then asphalt can be applied with bitumen in 2 coats to 4 centimeters. You can start asphalt laying on the surface after 2 weeks. Such a base can then be flushed in cold water to speed up the process of decontamination. The outcome of preparing the base will be a clean surface, with the absence of pits and mounds. 

How to Lay Concrete Base For Sports Surfaces 

Due to its durability and undemanding, the concrete base is the most popular option. It is often selected for floors, modular and rubber sealants and artificial grass laying. The density of the concrete base can be estimated by professionals. Properties of the soil, materials and design loads should be taken into account. One thing is for certain, it is never established by less than 100 millimeters. 

In this particular instance, the transition process for the base begins with the creation of the secured area at a depth of 40 centimeters. It needs to be filled with the turf, sand, gravel, waterproofing first and then concrete. Remember to always add a small incline for better water drainage. 

When the concrete surface is applied, it is planed and often compressed. After this process, we will need a period of at least 26 days to stabilize the area. Once stabilized to the required extent, you should have a sturdy smooth surface equipped for substrate.


Leave a Reply

Your email address will not be published. Required fields are marked *